How to use hydroxypropyl methylcellulose

2024-02-26 12:02

1. How to use HPMC

1. Configure on demand

According to different uses and performance requirements, you can refer to the recommended ratio according to the product manual and configure it as needed.

2. Stir evenly

Put HPMC and other materials into the mixer and stir as needed. The general stirring speed is 1500-3000 rpm and the time is 5-10 minutes.

3. Add water and ingredients

When stirring, gradually add an appropriate amount of water and other materials as needed, and pay attention to controlling the amount of water added to ensure product performance.

4. Filter

After stirring, the product should be filtered using a filter or screen to eliminate impurities and ensure product quality.

2. Precautions for HPMCHydroxypropyl Methyl Cellulose

1. Storage Notes

HPMC needs to be stored in a dry, ventilated, non-toxic and odor-free environment to avoid moisture, contamination or deterioration.

2. Packaging precautions

Hydroxypropyl Methyl Cellulose needs to be sealed to maintain the vitality of its active ingredients. During the packaging process, care should be taken to avoid exposure to sunlight, oxygen or fire.

3. Pay attention to the construction environment

At the construction site, the ambient humidity and temperature should be kept appropriate to ensure the effectiveness of Hydroxypropyl Methyl Cellulose.

Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.